Turning The Power On/Off; Turning The Power On; Various Ways To; Turning The Power Off - Fujitsu SP-1120 Operator's Manual

Chapter 1 Scanner Overview

1.3 Turning the Power ON/OFF

This section explains how to power on/off the scanner.

Turning the Power ON

1
Press the power button on the operator panel for more
than 2 seconds.
 The scanner is turned on, and during initialization, the power
indicator flashes.
When the power indicator stays on, the scanner is ready to scan.
This is referred to as "ready" status.
HINT
When the scanner is ready to be used, the check indicator turns off
and the power indicator turns on.

Turning the Power OFF

1
Press the power button on the operator panel for more
than 2 seconds.
 The scanner is turned off, and the power indicator turns off.
Check
indicator
Power
indicator
Power button
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel

Various Ways to

Scan

Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
16