Fujitsu SP-1120 Operator's Manual page 39

Chapter 3 How to Use the Operator Panel
3.1 Operator Panel
The operator panel consists of buttons and indicators.
Names and Functions
*1: For details about how to scan by pressing the scan/stop button, refer to the scanner driver's Help (included in the Setup DVD-ROM) or
Button on the Scanner to Start Scanning" (page
Check indicator
Lights or flashes in orange when an error occurs.
Power indicator
Lights in green when the scanner is on.
This indicator flashes immediately after the scanner is turned on, or
when resuming from power saving mode.
Scan/stop button (*1)
Starts up the linked application.
Cancels the scan.
Power button
Turns the power on/off.
46).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
"Using a
Operational
Settings
Appendix
Glossary
39