6.3.3 Cleaning the filter element
Fig. 66: Cleaning the filter element
(1) - Filter element
(2) - Water separator
Cleaning steps
1. Drain the water condensation ( p. 69).
2. Unscrew the water separator (2).
3. Unscrew the filter element (1).
4. Blow out the filter element (1) using a compressed air gun.
5. Wash out the filter tray using benzine.
6. Tighten the filter element (1).
7. Tighten the water separator (2).
8. Tighten the drain screw (3).
70
WARNING
Risk of injury
Switch off the machine and disconnect it from the
pneumatic network before you clean the filter
element.
NOTICE
Damage to the paintwork due to solvent-based cleaners.
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter tray.
6
4
8
2
10
0
1
2
3
(3) - Drain screw
Service Instructions 911-211 - 00.0 - 02/2015
Maintenance work