Table of Contents
Advertisement
3.3 Removing and opening covers
In many types of setting work, you will have to remove the machine covers
in order to access the components.
Described here is how to remove the individual covers and how to refit
them. Just the cover that needs to be removed is then specified in the text
for that particular type of setting work.
3.3.1 Access to the machine bottom section
In order to access the components at the machine bottom section, you
must first swivel up the machine head.
Fig. 1: Swiveling the machine head up and down
①
(1) - Locking lever
(2) - Head cover area
Swiveling up the machine head
1. Release the locking lever (1) under the table top.
2. Lift the machine head in the head cover area (2) and swivel up carefully.
The latch (4) latches into place.
Swiveling down the machine head
1. Hold the machine head in the head cover area (2).
2. Release the latch (4).
3. Swivel the machine head down.
4. Latch the locking lever (1) under the table top.
10
WARNING
Risk of injury!
Crushing injuries from moving parts.
Switch the machine off before you remove the
covers or refit them.
②
③
(3) - Drive carriage
(4) - Latch
Working basis
④
Service Instructions 911-211 - 00.0 - 02/2015
Advertisement
Table of Contents
