Table of Contents
Advertisement
About these Service Instructions
1
These instructions for the CNC sewing unit 911-211 were compiled with
the utmost care. They contain information and notes in order to ensure
long-term and reliable operation.
1.1 Scope of the Service Instructions
These instructions describe the setting and maintenance work on the
911-211 CNC sewing unit. They apply to all submodels.
The intended use and setup is described in the Operating Instructions.
1.2 Representation conventions – symbols and characters
Various information in these instructions is represented or highlighted
by the following characters in order to facilitate easy and quick under-
standing:
Proper setting
Indicates proper setting.
Malfunctions
Specifies the faults that can occur due to an incorrect setting.
Steps to be performed when operating the machine (sewing and
equipping)
Steps to be performed for service, maintenance, and installation
Steps to be performed via the software control panel
The individual steps are numbered:
1. First step
1.
2. Second step
2.
The sequence of the steps must always be followed.
etc
•
Lists are identified by bullet points.
Result of performing an operation
Change to the machine or in the display.
Important
Special attention must be paid to this point when performing a step.
Service Instructions 911-211 - 00.0 - 02/2015
About these Service Instructions
3
Advertisement
Table of Contents
