Working basis
3
3.1 Sequence of the settings
The setting positions for the sewing machine are interdependent.
Sequence
must be
observed!
Always adhere to the specified sequence for the individual setting steps.
Always observe all information on requirements and following settings
marked at the side with
3.2 Cable routing
Lay all cables in the machine such that moving parts are not impaired in
Tying cables
together
their ability to function correctly.
1. Lay any excess cabling neatly in proper cable snakes.
2. Tie the snakes together using a cable tie.
3. Cut off any protruding part of the cable tie.
Service Instructions 911-211 - 00.0 - 02/2015
Working basis
NOTICE
Machine damage possible due to incorrect sequence.
It is essential to adhere to the working sequence specified in these
instructions.
If possible, bind the snakes to fixed parts.
The cables must be fixed firmly in place.
NOTICE
Machine damage and malfunctions can be caused by laying
the cables incorrectly.
Excess cabling may obstruct moving machine parts in their ability to
function correctly. This will affect the sewing function and may cause
damage.
Lay excess cabling as described above.
.
9