Table of Contents
Advertisement
Maintenance work
6
6.1 Lubrication
Required oil:
Only DA 10 or equivalent oil should be used for the machine, which has
the following properties:
• Viscosity at 40 °C: 10 mm²/s - ISO VG10
• Flash point: 150 °C
DA 10 can be obtained under the following part number at DA sales
offices:
Service Instructions 911-211 - 00.0 - 02/2015
Maintenance work
WARNING
Risk of injuries due to contact with oil!
Contact with oil can cause irritation, rashes, aller-
gies or skin injuries.
ALWAYS avoid long-term contact with oil.
ALWAYS thoroughly wash the affected areas if
contact with oil occurs.
ATTENTION
Risk of environmental damage from oil!
Oil is a pollutant and must not enter the sewage
system or the soil.
Collect waste oil carefully and dispose of it and oily
machine parts in accordance with the applicable
statutory regulations.
NOTICE
Machine damage possible due to incorrect oil.
An incorrect oil type can cause damage to the machine.
Only use oil that complies with the data in the instructions.
• 9047 000011 - 250 ml
• 9047 000012 - 1 l
• 9047 000013 - 2 l
• 9047 000014 - 5 l
65
Advertisement
Table of Contents
