Machine head
Setting the position of the burner tip
Fig. 47: Setting the position of the burner tip
⑪
⑫
(11) - Screws
(12) - Burner tip
1. Loosen the screws (11).
2. Adjust the length of the burner tip (12).
3. Tighten the screws (11).
4. Use the screws (13) to make a height adjustment if necessary.
Adjusting the chokes
Fig. 48: Adjusting the chokes
1. Adjust the chokes (14, 15).
Service Instructions 911-211 - 00.0 - 02/2015
⑭
⑮
(14) - Choke - upward movement
(13) - Screws
(15) - Choke - downward movement
⑬
51