Changing The Burner Tips - DURKOPP ADLER 911-211 Service Instructions Manual

4.9.3 Changing the burner tips

Cover
• Burner cover ( 3.4 Removing and installing the burner cover (optional),
• Swiveling up the machine head ( 3.3.1 Access to the machine bot-
Fig. 51: Changing the burner tips
①
②
(1) - Screws
Setting steps
1. Loosen the screws (1).
2. Change the burner tips (2).
3. Tighten the screws (1).
4. Tap on Tools > Service > Multitest > Thread burner.
5. Use Burner on to verify that the burner tip is glowing (turns off auto-
54
WARNING
Risk of injury!
Risk of sustaining burns at hot burner tip.
Never touch the burner tip.
p. 14)
tom section, p. 10)
matically after 10 s).
(2) - Burner tip
Service Instructions 911-211 - 00.0 - 02/2015
Machine head
②
①