Table of Contents
Advertisement
Fig. 26: Setting the timing for lifting
(1) - Plug
Setting steps
1. Remove the plug (1).
2. Press and turn the hand crank until the tip of the needle is level with the
3. Slacken the setscrew (2) and use a hex key to turn the socket-head
4. Tighten the setscrew (2).
5. Insert the plug (1) into the opening.
30
①
throat plate. The setscrew (2) must be accessible from the underside of
the hook support.
screw so that the hex key stands exactly vertical.
②
(2) - Setscrew
Service Instructions 911-211 - 00.0 - 02/2015
Machine head
Advertisement
Table of Contents
