Removing The Covers; Access To The Underside Of The Machine - DURKOPP ADLER 878-M PREMIUM Service Instructions Manual

Working basis

3.4 Removing the covers

For many types of work settings, you will have to remove the machine
covers first in order to access the components.
This chapter describes how to remove and then refit the individual covers.
The text for each type of work setting then specifies only the cover that
needs to be removed at that particular time.
3.4.1
Cover
In order to access the components on the underside of the machine, you
must first swivel up the machine head.
Fig. 2: Access to the underside of the machine
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine into the service position or
switch the machine off before removing the covers.
WARNING
Risk of injury from sharp parts!
Punctures possible.
Move the machine into the service position or
switch the machine off before removing the covers.

Access to the underside of the machine

15