Removing The Covers; Access To The Underside Of The Machine - DURKOPP ADLER H-Type 969 Service Instructions Manual

3.3 Removing the covers

For many types of setting work, you will have to remove the machine cov-
ers in order to access the components.
This section describes how to remove the individual covers and refit them.
The text for each type of setting work then specifies only the cover that
needs to be removed at that particular time.

3.3.1 Access to the underside of the machine

In order to access the components on the underside of the machine, you
must first swivel up the machine head.
Fig. 1: Tilting and erecting the machine head
Tilting the machine head
1. Push the lever (1) up.
2. Tilt the machine head.
Erecting the machine head
1. Tilt the machine head forward.
2. Pull the lever (1) up again and carefully tilt the machine head back down.
10
WARNING
Risk of injury!
Crushing injuries from moving parts.
Switch the machine off before you remove the
covers or refit them.
The locking mechanism disengages.
Basic Principles of Working with the Machine
Service Instructions 969 - 01.0 - 12/2015
①