2
!
Detail
Default settings are those settings that have not been changed since the
power is turned on, or that are available after pressing [Reset] to reset all
the previously specified settings.
The default settings can be changed. For details, refer to page 14-31.
The factory default settings are the settings that were set when this ma-
chine was shipped from the factory.
Turning off the machine
0 The main power is normally to be kept turned on. Turning it off will termi-
nate all the functions including printing, and receiving and outputting fac-
simile data.
0 Do not turn off the main power while queued jobs or stored jobs are still
pending to be printed.Otherwise, data that are yet to be printed out will
be deleted.
0 Do not turn off the main power or sub power while printing is in
progress.Otherwise it will cause paper misfeeds.
0 Do not turn off the main power or sub power while scanning originals or
transmitting image data.Otherwise, data whose handling has yet to be
completed will be deleted.
1
Turn off the sub power.
–
The sub power
switch is located on
the right side surface
of the control panel.
–
Press the sub power
switch to turn it off.
The display on the touch panel goes off, and all the lights are turned off
except for the main power indicator.
2-28
Before Making Copies
bizhub 500/420