Utility <Administrator Setting>
3
Enter the current password.
–
Password entry is limited to 8 alphanumerical characters.
–
The password is case sensitive.
–
If entered password is wrong or less than 8 characters, an error
message will be displayed on touching [OK] and any key on the
control/touch panel will be unavailable for the next five seconds.
Enter the correct password after five seconds.
–
Wrong operations will be recorded in the audit log.
Touch [OK].
4
Enter the new password, then touch [OK].
5
Enter the new password again for confirmation, then touch [OK]. Or,
touch [Cancel] to cancel the change.
In either case, the Security Setting Screen will be restored.
6
If further changes are required, touch the desired key.
bizhub 500/420
15
15-107