Konica Minolta bizhub 500 User Manual page 288

Application Functions
5
Touch [Centering] on the Image Adjustment Screen to highlight it.
6
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Image Adjustment Screen to cancel the set-
ting change.
7
Select additional copy conditions, as desired.
– The machine automatically selects tray 1 as factory default. To
specify the paper size, touch [Paper] to display the Paper Screen,
then touch the desired tray key to highlight it.
8
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Application
Screen or Basic Screen.
bizhub 500/420
5
5-79