Advanced Information
4
Check the sample copy.
–
The count display under Number of Sets on the Proof Copy Screen
indicates the printed set count per specified print quantity.
–
If the sample copy gives satisfactory result, proceed to step 9.
To change any settings, proceed to the next step.
5
Touch [Change Setting] on the Proof Copy Screen.
The Change Setting Screen will be displayed.
6
Make the setting change as desired.
–
The following settings can be changed from the screen after proof
copying.
Print Quantity
Simplex/Duplex (except for the simplex/duplex original type)
Finishing
Folding
Cover Mode
Insert Sheet
Chapters
Page Margin
Stamp
bizhub 500/420
7
7-3