Folding Copies At The Center/Binding Copies At The Center: Half Fold/ Fold & Staple; Function Overview - Konica Minolta bizhub 500 User Manual

Hide thumbs Also See for bizhub 500:

Table of Contents

Finishing/Folding

Folding Copies at the Center/Binding Copies at the

Center: Half Fold/ Fold & Staple

The Half Fold and Fold & Sta-

ple modes are available on the

machine mounted with Finish-

er FS-510 and Saddle Stitcher

SD-502 as illustrated on the

right, along with Booklet func-

tion which will be automatical-

ly selected in combination.

- In the Half Fold mode, each copied sheet is creased and output to the

Saddle stitcher tray.

- In the Fold & Staple mode, each copied set is creased and stapled at two

positions (saddle stitched), then output to the Saddle stitcher tray.

Finisher FS-510 is initially equipped with two exit trays,and one optional

exit tray (OT-601) can be installed. Contact your service representative, if

desired. (Already installed in the above illustration.)

bizhub 500/420

Troubleshooting