Weekly Timer Setting>2 Time Setting; To Specify Time Setting - Konica Minolta bizhub 500 User Manual

Utility <Administrator Setting>
3
Touch [ON] or [OFF] to highlight it.
The default setting is OFF.
– [ON]: Enables the Weekly Timer. With this setting ON, the machine
should be kept powered.
– [OFF]: Disables the Weekly Timer. Use the main power switch and
sub power switch to turn on/off the machine.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
5
If further changes are required, touch the desired key.
15.2.7 5 Weekly Timer Setting>2 Time Setting
Use this function to set the on/off times in hours and minutes for each day of
the week.

To specify Time Setting

0 If ON-time and OFF-time are the same, the power will not be turned on.
0 Setting on/off times will not turn on the power on that day. To turn on the
machine power, specify the days to operate the timer in the next setting
(Date Setting).
1
Follow the procedure on page 15-2 to display the Administrator Setting
Screen.
bizhub 500/420
15
15-33