To Copy Using Chapters - Konica Minolta bizhub 500 User Manual

Application Functions
Simplex/Duplex
2%2
Chapter paper: Copy
Insert

To copy using Chapters

0 Load the original in the ADF. If the number of original sheets exceeds 80,
use Separate Scan mode. For details, see "Separate Scan Setting" on
page 3-58.
0 With Separate Scan mode selected, the original glass can also be used
to scan the original.
0 Up to 30 title pages can be specified for the original from 1 to 999 pages.
0 The tray selection can be changed for printing specified title pages. How-
ever, it cannot be changed individually for each title page.
1
Position the original.
– When using ADF, be sure to arrange the original in page order, and
then place it with the first page faceup; otherwise the copy result
may not be satisfactory.
– When using original glass, be sure to scan from the first page of the
original in page order; otherwise the copy result may not be satis-
factory.
2
Enter the desired print quantity from the control panel keypad.
3
Select [1%1] or [2%1] mode.
– For details on specifying "Simplex/Duplex Setting" on page 3-46.
bizhub 500/420
Description
The same page insertion is performed as above, and the chapter pages
(2/3 and 5/6) will be printed on paper from another tray source.
5
5-25