5
7
Specify the desired Scan Range mode.
–
If the original size can hardly be detected from the ADF, use Set
Range mode to specify the scanning area manually.
–
To specify the scanning area of the original placed on the original
glass, touch [Set Range] to display the Standard Size Screen, then
select the desired scanning area.
Use up/down arrow key to scroll to the desired size, if necessary.
–
To enter the dimensions of scanning area, touch [Custom Size] on
the Standard Size Screen to display the Custom Size Screen, then
enter the desired dimensions from the control panel keypad. In or-
der to specify a fraction, touch the bidirectional arrow key to move
the cursor, then use [+] and [–] to enter the desired value in 1/16 in.
increments.
–
Touch [OK] to return to the Image Repeat Screen.
5-46
Application Functions
bizhub 500/420