Konica Minolta bizhub 500 User Manual page 252

Application Functions
9
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Image Repeat Screen, Standard Size Screen
or Custom Size Screen to cancel the setting change.
10
Select additional copy conditions, as desired.
– Specify the desired magnification.
The number of repeats will be determined automatically from spec-
ified scanning area, selected paper size and magnification ratio.
11
Press [Start] on the control panel.
The machine will start printing when ready for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Application
Screen or Basic Screen.
bizhub 500/420
5
5-43