Konica Minolta bizhub 500 User Manual page 155

3
2
Touch [XY Zoom].
The XY Zoom Screen will be displayed.
3
Touch the icon key in the Zoom with Constant X and Y Ratio area to
highlight it, then enter the desired magnification ratio from the control
panel keypad.
– When registering a proportional zoom ratio, enter the value within
the range from ×0.250 to ×4.000.
– When changing the Minimal ratio setting, enter the value within the
range from ×0.900 to ×0.999.
Entered ratio will be displayed in the Zoom with Constant X and Y Ratio
area.
What should be done if the message "Input Error" is displayed and
?
entered size is ignored?
The value just entered is out of available range.
% Press [C] (Clear) on the control panel, then reenter the correct value.
4
Touch [Set Zoom].
The Set Zoom Screen will be displayed.
3-42
Basic Copy Operations
bizhub 500/420