Konica Minolta bizhub 500 User Manual page 298

Application Functions
5
Specify the start number and page number type.
– Touch [Page #] under Start No., then enter the desired start number
from the control panel keypad.
Press [1] on the control panel to switch the value from plus to minus
and vice versa.
– To start the page number from the first page of each chapter, touch
Chapter to highlight it, then enter the desired start number from the
control panel keypad.
Press [1] on the control panel to switch the value from plus to minus
and vice versa.
– Touch one of the five keys under Page No. Type to highlight it.
– To make settings for printing page number onto covers or inser-
tions, proceed to the next step.
To change or make fine adjustment on the print position currently
specified as indicated on the Print Position key, proceed to step 7.
To complete this setting, proceed to step 9.
? Do you want to change the currently entered value using control
panel keypad?
% Press [C] (Clear) on the control panel, then enter the correct value.
What if the value just entered is out of available range?
?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
bizhub 500/420
5
5-89