Application Functions
9
Select whether or not to copy onto the insertions.
–
To copy onto the insertions, touch [Copy] under Insert Type to high-
light it.
–
To leave the insertions blank, touch [Blank] under Insert Type to
highlight it.
10
Confirm settings on the Insert Sheet Check Screen, and make setting
change, if desired.
–
To change the insertion tray source, return to step 8.
To change the insertion type, return to step 9.
–
To change insertion locations, touch [Edit] and return to step 7.
11
Touch [OK] to return to the Application Screen.
–
Touch [Cancel] on the Insert Sheet Screen or Insert Sheet Check
Screen to cancel the setting change.
12
Select additional copy conditions, as desired.
13
Press [Start] on the control panel.
bizhub 500/420
5
5-17