Keypad Menu Parameters - Bosch B5512 Reference Manual

122 en | Keypad Installer menu
B93x/B94x keypads configuration of Area On
1.
2.
3.
4.
5.
6.
7.
Account Number
B91x/B92x keypads configuration of Account Number
1.
2.
3.
4.
5.
6.
7.
8.
B93x/B94x keypads configuration of Account Number
1.
2.
3.
4.
5.
6.
7.
19.1.14

[5] Keypad menu parameters

The scope of a keypad defines which areas the keypad affects when armed (on), which areas
you can view with this keypad, and the areas to which this keypad can move. In this menu, you
can choose the keypad's scope.
Keypad 1
Keypad 2
Keypad 3
Keypad 4
Keypad 5
Keypad 6
2015.07 | 12 | F.01U.287.180
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [4] Area Options menu. The keypad shows the Area On state for the
selected area.
Use /[PREV] or /[NEXT] to go to the desired area.
Press [Edit] to edit the Area On state for the selected area.
Press [Yes] or [No].
Press [Save] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [4] Area Options. The keypad toggles between showing the Area On
state and the account number for the selected areas.
Use [PREV] or [NEXT] to go to the desired area.
Press [ENTER] to edit the area, and then press [NEXT] to go to the account number
option.
Press [ENTER] to edit the account number for the selected area.
Delete existing characters, if necessary, and then enter the new characters.
Press [ENTER] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [4] Area Options menu. The keypad shows the Area On state for the
selected area.
Use /[PREV] or /[NEXT] to go to the desired area.
Press [Account #] to view and edit the account number, and then press [Edit] to edit the
account number.
Delete existing characters, if necessary, and then enter the new characters.
Press [Save] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Scope (Circle one)
No Device / Area Wide / Acct Wide / Panel Wide
No Device / Area Wide / Acct Wide / Panel Wide
No Device / Area Wide / Acct Wide / Panel Wide
No Device / Area Wide / Acct Wide / Panel Wide
No Device / Area Wide / Acct Wide / Panel Wide
No Device / Area Wide / Acct Wide / Panel Wide
Installation and System Reference Guide
Control Panel
Bosch Security Systems, Inc.