Bosch B5512 Reference Manual page 118

118 en | Keypad Installer menu
2.
3.
4.
5.
6.
B93x/B94x keypads configuration of SIM APN
1.
2.
3.
4.
5.
6.
SIM Username
B91x/B92x keypads configuration of SIM Username
1.
2.
3.
4.
5.
6.
B93x/B94x keypads configuration of SIM Username
1.
2.
3.
4.
5.
6.
SIM Passcode
B91x/B92x keypads configuration of SIM Passcode
1.
2.
3.
4.
5.
6.
B93x/B94x keypads configuration of SIM Passcode
1.
2015.07 | 12 | F.01U.287.180
Go to [1] Program > [2] Network > [2] Cellular > (choose the SDI2 cellular module or
plug-in module) > [1] SIM APN. The keypad shows the current configuration.
Press [ENTER] to edit the configuration.
Delete existing characters, if necessary, and then enter the new characters.
Press [ENTER] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [2] Network > [2] Cellular > (choose the SDI2 cellular module or
plug-in module) > [1] SIM APN. The keypad shows the DHCP/AutoIP current
configuration.
Press [Edit] to edit the configuration.
Delete existing characters, if necessary, and then enter the new characters.
Press [Save] to save the changes.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [2] Network > [2] Cellular > (choose the SDI2 cellular module or
plug-in module) > [2] SIM Username. The keypad shows the current configuration.
Press [ENTER] to edit the configuration.
Delete existing characters, if necessary, and then enter the new characters.
Press [ENTER] to save the changes.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [2] Network > [2] Cellular > (choose the SDI2 cellular module or
plug-in module) > [2] SIM Username. The keypad shows the UPnP current configuration.
Press [Edit] to edit the configuration.
Delete existing characters, if necessary, and then enter the new characters.
Press [Save] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [2] Network > [2] Cellular > (choose the SDI2 cellular module or
plug-in module) > [3] SIM Passcode. The keypad shows the current configuration.
Press [ENTER] to edit the configuration.
Delete existing characters, if necessary, and then enter the new characters.
Press [ENTER] to save the changes.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Installation and System Reference Guide
Control Panel
Bosch Security Systems, Inc.