Program Menu; Reporting > [1] Phone Menu Parameters - Bosch B5512 Reference Manual

Control Panel
19.1

[1] Program menu

With the Program menu, you can program parameters to make your system operational,
including phone number and format, enhanced communication options, primary and backup
routes, and notifications.
19.1.1 [1] Reporting > [1] Phone menu parameters
The control panel can dial as many as four different telephone numbers when sending event
reports. In this menu, you can program the telephone numbers and the format.
Phone 1
Phone 2
Phone 3
Phone 4
Phone Number
B91x/B92x keypads configuration of Phone Number
1.
2.
3.
4.
5.
6.
7.
B93x/B94x keypads configuration of Phone Number
1.
2.
3.
4.
5.
6.
7.
Phone Format
B91x/B92x keypads configuration of Phone Format
1.
2.
3.
4.
5.
Bosch Security Systems, Inc.
Format (circle one)
Modem4/Contact ID
Modem4/Contact ID
Modem4/Contact ID
Modem4/Contact ID
Enter the installer passcode, and then go the [1] Installer menu.
Go to [1] Program > [1] Reporting > [1] Phone. The keypad display toggles between
showing the phone number and phone format for the phone destination.
Use [PREV] or [NEXT] to go to the destination you want to edit.
Press [ENTER] to edit the phone destination and then [ENTER] to edit the phone number
for the selected destination.
Delete existing characters, if necessary, and then enter the new phone number.
When finished, press [ENTER] to save the phone number.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [1] Reporting > [1] Phone menu. The keypad shows the phone
number for the phone destination.
Use /[PREV] or /[NEXT] to go to the destination you want to edit.
Press [Edit] to change the phone number.
Delete existing characters, if necessary, and then enter the new phone number.
When finished, press [Save] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [1] Reporting > [1] Phone. The keypad display toggles between
showing the phone number and phone format for the phone destination.
Use [PREV] or [NEXT] to go to the destination you want to edit.
Press [ENTER] to edit the phone destination and then press [NEXT] to go to the format
option.
Press [ENTER] to edit the phone format for the selected destination.
Installation and System Reference Guide
Phone number
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Keypad Installer menu | en
2015.07 | 12 | F.01U.287.180
107