Bosch B4512 Instruction

B920 Intrusion System Instruction Card
For B4512 and B5512 Intrusion Panels
Arming the System
1. Enter your personal passcode and press the
2. Proceed to the nearest exit delay door
Disarming the System
1. Enter through the nearest entry delay door.
2. Enter your personal passcode and press the
Perimeter Arming
1. Press the PART key or CMD 3 to arm only the perimeter.
2. Enter your personal passcode and press the
Note: To prevent the alarm from sounding, the alarm system must be
disarmed before leaving through any perimeter door. The display will
read, Part On Dly if the system is armed. Follow the instructions above
to disarm.
Force Arming the System
1. Enter your personal passcode and press the
2. The display will read Check area 1.
3. Press the NEXT key twice.
4. The display will read Review complete. Enter to force on.
5. To force arm, press the ENTER key or the ESC key to exit.
Bypassing a Point
1. Press the BYPASS button and select 1 or press CMD 0
2. Enter your personal passcode and press the
3. Enter the point number to be bypassed or press the
key to view the next pypassable point.
4. Press ENTER to bypass.
Unbypassing a Point
1. Press the BYPASS button and select 2 or press CMD 00
2. Enter your personal passcode and press the
3. Enter the point number to be unpypassed or press the
key to view the next bypassed point.
4. Press ENTER to unbypass.
Silencing an Alarm
1. Enter your personal passcode and press the
2. The display will read *Alarm Silenced*, the number of
alarms recorded and display the point text from the point(s)
that generated the alarm condition.
3. To clear alarm memory and stop the keypad from scrolling,
press the ENTER key.
4. Enter your personal passcode and press the
clear the display.
Silencing System Trouble Tones
1. Press the ENTER key to silence a trouble tone.
Turn Watch Mode On or Off
1. Press the MENU button followed by 51 or CMD 6
2. Press ENTER to turn watch mode on.
3. To turn off, repeat step 1 and 2.
Using the Help Menu
1. Press the HELP button at anytime during any condition to
display expanded system information.
www.boschsecurity.us
ENTER key.
ENTER key.
ENTER key.
ENTER key.
Callout
Number
1
2
3
ENTER Key.
NEXT
4
5
6
ENTER Key.
7
NEXT
8
9
10
ENTER key.
11
Operating the Menu
ENTER key to
1. Press the
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
menu
8. Press
Arm and Disarm the System
1. Press
on menu.
2. Press
on menu.
3. Press
the system.
Description
Alphanumeric display
HELP key
PREV and NEXT keys
Status LEDs
ESC key (Escape)
CMD key (Command)
Softkeys (B930 only)
Programmable function keys (B920 only)
ALL, PART, and BYPASS keys (B920 only)
ENTER key (B920 only)
MENU key (B920 only)
Check System Status
MENU key. 1. Press
area status.
1 for on/off menu
2. Press
2 for status menu
point status.
3 for actions menu
4 for users menu
Add and Delete Users
5 for settings menu
6 for shortcuts
1. Press
change a users passcode.
7 for events menu
2. Press
user to the system.
3. Press
user.
MENU 11 for the all
4. Press
a user.
MENU 12 for the part
Set Date and Time
MENU 13 to disarm
1. Press
© Bosch Security Systems, 2013
MENU 21 to view
MENU 22 to view
MENU 41 to
MENU 42 to add a
MENU 43 to edit a
MENU 44 to delete
MENU 52
Modifications reserved
v.20130724