Cellular Menu; Ip Camera - Bosch B5512 Reference Manual

140 en | Keypad Installer menu
B93x/B94x keypads use of Connection (for the Bus Module)
1.
2.
3.
19.3.3

[3] Cellular menu

You can obtain certain cellular module diagnostic information using a keypad and this menu.
Cellular (diagnostics)
B91x/B92x keypads use of Cellular (diagnostics)
1.
2.
3.
B93x/B94x keypads use of Cellular (diagnostics)
1.
2.
3.
19.3.4

[4] IP Camera

IP Camera
2015.07 | 12 | F.01U.287.180
Enter the installer passcode, and then open the [1] Installer menu.
Go to [2] Network > (choose the bus module or on-board) > [2] Connection. The keypad
scrolls through the following sub-categories, indicating the diagnostic information for:
Link, IP Address, DNS, WAN IPv4, WAN IPv6, LAN IPv4, LAN IPv6.
When finished viewing the information, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [3] Diags Menu > [3] Cellular > (choose the SDI2 cellular module or plug-in
module). The keypad scrolls through the following sub-categories, indicating the
diagnostic information for:
– Link (Yes or No. Yes indicates a data connection to the carrier. No indicates a
connection problem.)
– iPv4 IP (The IP address of the cellular radio on the carrier's network.)
– Base ID
– Signal (Signal strength = unacceptable, marginal, good, or very good.)
– Signal (In dBs.)
– Tel Num (If provided by the carrier.)
– ESN (The cellular radio electronic serial number.)
– Model (The cellular radio model.)
– Version (The cellular radio version.)
When finished viewing the information, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [3] Diags Menu > [3] Cellular > (choose the SDI2 cellular module or plug-in
module). The keypad scrolls through the following sub-categories, indicating the
diagnostic information for:
– Link (Yes or No. Yes indicates a data connection to the carrier. No indicates a
connection problem.)
– iPv4 IP (The IP address of the cellular radio on the carrier's network.)
– Base ID
– Signal (Signal strength = unacceptable, marginal, good, or very good.)
– Signal (In dBs.)
– Tel Num (If provided by the carrier.)
– ESN (The cellular radio electronic serial number.)
– Model (The cellular radio model.)
– Version (The cellular radio version.)
When finished viewing the information, escape from the menu.
Installation and System Reference Guide
Control Panel
Bosch Security Systems, Inc.