Bosch B5512 Reference Manual page 78

78 en | Control panel board overview
Callout ᅳ Description
13 ᅳ Tamper switch connector
14 ᅳ SDI2 interconnect wiring connector
15 ᅳ Sensor loop terminals for points 1 to 8
16 ᅳ SDI2 terminals (power and data)
17 ᅳ Auxiliary power terminals
18 ᅳ Terminals for OUTPUT A
19 ᅳ Battery terminals
20 ᅳ 18 VAC power input terminals
2015.07 | 12 | F.01U.287.180
For more information, refer to:
Install the enclosure and wiring label, page 23
SDI2 interconnect wiring, page 20
On-board points, page 63
SDI2 devices general system wiring, page 85
On-board outputs, page 58
Configure OUTPUT A using the jumper, page 25
Secondary (DC) power, page 28
Primary (AC) power, page 28
Installation and System Reference Guide
Control Panel
Bosch Security Systems, Inc.