Reporting > [3] Routing Menu Parameters - Bosch B5512 Reference Manual

110 en | Keypad Installer menu
3.
4.
5.
6.
7.
8.
9.
10. Press [Poll Rate] to view the poll rate, and then press [Edit] to edit the poll rate number.
11. Delete existing characters, if necessary, and then enter the new poll rate.
12. Press [Save] to save the address. The keypad shows Parameter Saved, and returns to the
13. Press the icon or softkey for the desired option (address, port #, poll rate, AES key size).
14. Press [Edit] to change programming.
15. Press [Save] to save the programming.
16. When the keypad shows Parameter Saved, escape from the menu.
19.1.3 [1] Reporting > [3] Routing menu parameters
Use routing to program primary and backup destinations over standard telephone lines, local
area network (LAN) or wide area network (WAN). In this menu, you can designate the primary
and backup destinations for up to four routes.
Options include:
No Device, Phone 1, Phone 2, Phone 3, Phone 4, SDI2-1 D1, SDI2-1 D2, SDI2-1 D3, SDI2-1 D4,
SDI2-2 D1, SDI2-2 D2, SDI2-2 D3, SDI2-2 D4, Onboard D1, Onboard D2, Onboard D3, Onboard
D4, Cellular D1, Cellular D2, Cellular D3, Cellular D4.
Primary Device
Backup Device
Primary Destination Device
B91x/B92x keypads configuration of Primary Destination Device
1.
2.
3.
4.
5.
6.
7.
8.
9.
2015.07 | 12 | F.01U.287.180
Use /[PREV] or /[NEXT] to go to the destination you want to edit.
Press [Edit] to change the network address. The existing address and an editing cursor
show.
Delete existing characters, if necessary, and then enter the new address.
Press [Save] to save the address. The keypad shows Parameter Saved, and returns to the
previous menu.
Press [Port #] to view the port number, and then press [Edit] to edit the port number.
Delete existing characters, if necessary, and then enter the new port number.
Press [Save] to save the address. The keypad shows Parameter Saved, and returns to the
previous menu.
previous menu.
No Device
No Device
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [1] Reporting > [3] Routing. The keypad toggles between showing
the current primary and backup setting for the selected route.
Use [PREV] or NEXT] to scroll though the list of routes and go to the route you want to
program.
Press [ENTER] to edit the route.
Press [ENTER] to edit the primary route. The keypad shows Set Route Device.
Use [PREV] or NEXT] to scroll though the list of devices (for destination 1) and go to the
destination 1 option you want to select for the current device (for example, Phone 1).
Press [ENTER] to select the device. The keypad shows Set route dest 1-4. To keep
destination 1, escape from the menu. To change to a different destination (2, 3, or 4),
continue to Step 8.
Delete existing characters, if necessary, and then enter the new number.
Press [ENTER] to save the change, and then escape from the menu.
Installation and System Reference Guide
Route 1 Route 2
___________ ___________
___________ ___________
Control Panel
Route 3 Route 4
___________ ___________
___________ ___________
Bosch Security Systems, Inc.