Operating Instructions; Operating Surface Burners; Operating Surface Burner During A Power Failure; Oven Light - Amana ARGS7650 Service Manual

Operating Instructions

Operating Surface Burners

!
WARNING
To avoid risk of serious personal injury, property
damage, or fire, do not leave burners unattended
while in operation. Grease and spillovers can ignite
causing a fire.
Refer to individual technical sheets for specific information
on element ratings.
1. Push in and turn control knob counterclockwise to
"LITE" position.
• All burner will spark.
Typical Control Knobs
2. After gas ignites, turn control to desired setting.
• Each control knob can be set to any required
cooking temperature. Burner settings do not have
distinct clicks.
• Use "HI" to bring food to boiling temperatures.
When food is boiling temperature setting should be
reduced.
3. Turn control knob to "OFF" position when finished
cooking.
• If left in "LITE" position, ignitor will continue to
spark.
Operating Surface Burner during a Power
Failure
Although system that ignites the burners is electric,
surface burners can be ignited during a power failure.
Never attempt to light bake or broil burners during power
failure.
1. Hold match at base of desired burner.
2. Push in burner control knob and turn to "LITE"
position.
3. After gas ignites, remove match from burner and turn
burner control knob to desired setting.
RS2310002 Rev. 1

Oven Light

• Used to light inside of oven.
• Brightens oven cavity when oven door is opened or
panel switch is turned on.
• Switch is located on right side of control panel next to
clock.
• Operates automatically when oven door is opened.
OVEN LIGHT

Panel Light

• Used to light backguard and illuminate cooking
surface.
• Switch is located on left side of control panel next to
clock.
PANEL LIGHT
36