Eaton Krc With Mylar Overlay - Amana ARGS7650 Service Manual

Eaton KRC with Mylar Overlay

A
OFF
LO HI
MED
FRONT
A
B
OFF
LO HI
MED
FRONT
A Surface element
control knob
B Surface element
indicator light
C Oven light switch
D Range control
A C
B
OFF
LO HI
OVEN LIGHT
TIMER
CLOCK
MED
REAR
F E
irst dition
A C
OFF
LO HI
OVEN LIGHT
TIMER
CLOCK
MED
REAR
SELF CLEAN OVEN
Use to turn surface elements on and off. Settings:
LO—Use to prepare food at less than boiling temperatures or to simmer.
MED—Use to maintain boiling of larger amounts of food, low temperature frying and to
maintain correct pressure in a pressure cooker.
HI—Use to bring food to boiling temperatures. When food is boiling temperature setting
should be reduced to MED through HI.
Some ranges have two indicator lights, one for elements on right side and one for
elements on left side of range. When either front or rear element is on, corresponding
indicator light glows.
Some ranges have one indicator under clock. When any element is on, indicator light
glows.
Smoothtop ranges can have one or two indicator lights. After the surface controls are
turned off, the appropriate surface indicator light will continue to glow until the surface
elements have cooled. The time each light remains on will vary. Do not expect the
lights for two different heating areas to go off at the same time even if the elements
were turned off simultaneously.
Used to light inside of oven. On some models, light turns on when oven door is opened.
On all models, switch located next to clock, turns oven light on and off without opening
door.
Used to control oven functions like baking, broiling, and self-clean. Also controls clock
and minute timer.
D
OFF
WM
OVEN BROIL
+ +
CLEAN
HRS MINS
LOCKED
HRS MINS
PREHEATED
350
550
500
400
450
SURF ACE SELF CLEAN OVEN
D
OFF
OVEN
BROIL WM
+ +
HRS MINS CLEAN
LOCKED
HRS MINS
PREHEATED
550 350
500
450 400
C–1
A A
OFF OFF
LO HI LO
200
250
300
MED MED
REAR FRONT
A
B A
OFF OFF
LO HI LO
200
250
300
MED MED
REAR FRONT
RS2310002 Rev. 1
HI
HI