Installation Instructions for Freestanding Ranges
Level Range
Carefully level range using legs provided. Range must be
level to cook and bake uniformly.
!
CAUTION
To avoid damaging oven door, do not lift or move range
by oven door handle. Glass can break.
• Place a level on top oven rack or on top of range when
leveling.
• Leveling legs must be extended a minimum of
¼ inch to engage anti-tip bracket.
1. Extend leveling legs so when range is moved into
position range top clears counter top.
2. Slide range to where it will be installed.
• Position range so rear leveling legs do not engage
anti-tip bracket.
3. Turn leveling legs to level range.
• Turn legs clockwise to decrease range height or
counter clockwise to increase range height.
• Adjust rear leveling leg that engages anti-tip
bracket first. Leveling leg can not be adjusted while
in bracket. After adjusting leg that engages anti-tip
bracket, slide range until leg engages bracket, and
adjust other legs.
4. Replace storage drawer.
RS2310002 Rev. 1
Removal and Replacement of Range
1. Disconnect power to range.
2. Slide range forward.
3. Unplug range cord and place range aside.
4. Remove anti-tip bracket.
5. Install anti-tip bracket into new location using
instructions provided with bracket or see "Anti-tip
Bracket Installation" section.
6. To reinstall range, follow installation instructions.
32