Table of Contents
Advertisement
Installation Instructions for Freestanding Ranges
Remove rear cover to expose pressure regulator.
C
B
A—3¾ inches
B—31½ inches
C—2 inches
Pressure Regulator Conversion
Several varieties of gas pressure regulators may equip
gas cooking products. All gas pressure regulators
perform the same function. In most instances, universal
pressure regulators are used in gas cooking products.
Universal regulator can be modified to use either Natural
gas or liquefied petroleum (LP) gas supplies.
Universal pressure regulator, must be modified when
connecting gas cooking product to an LP gas supply.
How each type of universal pressure regulator is
converted to LP use is illustrated in the following
examples.
Example One
1. Remove pressure regulator cap with a
2. Remove plastic insert from cap. Insert fits tightly in
cap.
3. Reverse plastic insert. Push firmly into hole in cap.
4. Verify insert fits tightly in hole. Do not disturb spring
in regulator body.
5. Replace cap in regulator body.
RS2310002 Rev. 1
Natural Gas
A
Example Two
1. Remove cap with screwdriver.
2. Remove insert.
3. Reverse insert and replace. "LPG10" is visible. Do not
disturb spring in regulator body.
4. Replace cap.
Example Three
1. Remove cap marked "Nat."
2. Reverse cap. "LP" now appears on cap.
3. Reinsert cap. Do not disturb spring beneath the cap.
Verify fiber washer is correctly between cap and the
regulator body.
NOTE: Some models may not have washers. If washer
7
/
-inch wrench.
8
26
Cap
Plug
Spring
Natural Gas
is not supplied, none is needed.
Cap
Spring
Natural Gas
L.P. Gas
Plastic Insert
Cover
Spring Location
L.P. Gas
L.P. Gas
Hide quick links:
Advertisement
Table of Contents
