Table of Contents
Advertisement
5
5.2.7
03 Feed Tray Setting \ 05 Dehumidification Fan
If the Dehumidification Fan Heater HT-504 is attached to the Large Capacity Unit LU-202, specify the on/off
setting for dryness preparation and the fun heater function for each tray.
1
Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2
Touch [01 System Setting], [03 Feed Tray Setting], and then [05 Dehumidification Fan].
3
To enable the dryness preparation function, touch [On], otherwise touch [Off]. The selection becomes
highlighted.
–
Select [Automatic], [On (compulsory)], or [Off (compulsory)] to control the fun heater attached to
each tray of the Large Capacity Unit.
4
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the Feed Tray Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
5-10
User setting
CS655 Pro
Advertisement
Table of Contents
