3
3.4.8
05 2 Position Staple Pitch Adjustment (FS-607 Only)
Perform this adjustment for the staple pitch in Staple and Fold & Staple modes.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], and then [05 2 Pos. Staple Pitch Adj.].
The 2 Position Staple Pitch Adjustment Screen will be displayed.
3
Select the folding key to be adjusted.
4
Touch [COPY] tab.
The Copy Screen will be displayed.
5
Select the folding method to be adjusted, then press [Start] on the control panel.
A sample pattern will be output.
6
Check the amount of staple pitch.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The 2 Position Staple Pitch Adjustment Screen will be restored.
3-32
Adjustment
CS655 Pro