Table of Contents
Advertisement
5
5.2.10
05 Default Screen Setting
Select the initial screen to be displayed when the power switch is turned on.
-
[Machine]: The Machine Status Screen will be displayed.
-
[Job List]: The Job List Screen will be displayed.
-
[Copy]: Copy Screen will be displayed.
1
Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2
Touch [01 System Setting], and then [05 Default Screen Setting].
3
Select the desired initial screen to highlight it.
4
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the System Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
5-14
User setting
CS655 Pro
Advertisement
Table of Contents
