Table of Contents
Advertisement
Web utilities setting
8.4
Setting scan transmission function
Follow the procedure below to register, change, or delete the address for the transmission of the scanned
image data using the web browser. For details of the Scan Transmission Setting, contact your service
representative.
Prerequisites:
-
The Scan Transmission Setting is available in the following condition:
-
Using Scan Transmission Setting in the machine manager setting, you cannot newly register an E-
mail/HDD/FTP/SMB address or group the entries.
-
The [Scan transmission setting] key appears in the Scan Transmission Setting window only when the
optional Image Controller is installed in the machine.
-
Click on the DAILY USE check box in the E-mail Registration table, if the data is frequently used.
-
The symbols that cannot be displayed in the entry box will be ignored, if entered.
-
The HDD Box No. will be registered as a 9-digit number.
For example, entering [1] will be registered as [000000001].
1
Open the Web Utilities window.
2
Click on [Machine Manager Setting].
The Enter Network Password dialogue box will be displayed.
3
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text
box, then click on [OK].
The Machine Manager menu will be displayed.
4
Click on [Scan transmission setting].
The Scan Transmission Setting window will be displayed.
CS655 Pro
8
8-19
Advertisement
Table of Contents
