Half Fold Stopper Adjustment (Fs-607 Only) - Oce CS655 Pro Administrator's Manual

Adjustment
3.4.2

02 Half Fold Stopper Adjustment (FS-607 Only)

Perform this adjustment for the double-folding position processed by the Finisher FS-607.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment] and [02 Half Fold Stopper Adj.].
The Half Fold Stopper Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Multi Center, then press [Start] on the
control panel.
A sample pattern will be output.
5
Check the misalignment (a) of the edge of the feeding sheets.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Half Fold Stopper Adjustment Screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
CS655 Pro
a
3
3-21