Operation Prohibit Set \ 02 Change Prohibit Setting - Oce CS655 Pro Administrator's Manual

6
6.2.9

04 Operation Prohibit Set \ 02 Change Prohibit Setting

Specify whether to permit or prohibit the modification of the following settings.
Specify whether to permit or prohibit the modification of the following settings.
- Change Send Address:
Permit/prohibit to enter send address manually on the Scanner Screen.
- Change User Lens Mode:
Permit/prohibit to alter already programmed magnification ratio.
- Change Program Image Overlay:
Permit/prohibit to delete or overwrite a title of programmed overlay image.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [01 System Setting], [04 Operation Prohibit Set], and then [02 Change Prohibit Setting].
3
Touch to highlight [Permission] or [Prohibition] for each item.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Reset Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
6-16
Machine administrator setting
CS655 Pro