Table of Contents
Advertisement
Utility screen outlines
4.2
Function list of user setting
Setting Item/Description
01 System Setting
01 Language Setting
Select the language used in the LCD.
English / German / French /Italian/ Spanish
02 Unit Setting
Select the unit of measurement for the value to be entered by user and to
be displayed on the touch panel.
mm/ inch (decimal point)/ inch (Fraction)
03 Feed Tray Setting
01 Paper Setting
Register paper settings, or modify or delete registered settings.
Paper Type/ Name/ Weight/ Both Sides Adj./ Process Adj./ Speed
Setting/ Hole-Punch/ Colored Paper/ Air Assist/ link size Informa-
tion
02 Feed Tray Auto Selection
Select ATS for each tray and the priority of the detection when ATS
functions.
ATS/APS Switch (Trays 1 to 3): Off, Tray Priority: (Tray 3/ Tray/1
Tray2/ Bypass Tray)
03 ATS Permit Setting
Set ATS on or off.
on/ off
04 Auto Paper Type
Set the paper type to be selected when ATS functions.
Paper Type (Plain/High Quality Paper/Color Specific)/Weigh (64-74,
75-80, 81-105g/m
tion)/ Color Paper (Prohibition)
05 Dehumidification Fan
Specify the paper type which is to be selected in the ATS function.
Dryness preparation: on/off
Fan Heater Control (Tray4): Automatic/ On (compulsory)/ Off (com-
pulsory)
Fan Heater Control (Tray5): Automatic/ On (compulsory)/ Off (com-
pulsory)
04 Reset Setting
01 Auto Reset Setting
Set the reset interval starting from the completion of a copying job
until the machine returns to the initial condition, without selecting
any key on the touch panel or the control panel.
Off/ 60 seconds/ 120 seconds/ 180 seconds/ 240 seconds/ 300
seconds/ 360 seconds/ 420 seconds/ 480 seconds/ 540 seconds
02 Mode Reset Setting
Select whether or not to initialize the setting currently specified
when the machine takes it that the user has changed, or original
document is loaded into the ADF. And select the settings to be ini-
tialized each time a single job has been completed.
Change user/ ADF original direction/ Reset button function/ Mode
memory auto call/ Finisher Mode by Full-auto/ Initial by Key Coun-
ter Insert/ Status Hold When Auto Reset/ Next Job Staple Setting/
Original Set/Bind Direction
05 Default Screen Setting
Select the initial screen to be displayed when the power switch is turned
on.
Machine/ Job List/ Copy
06 Preset Zoom Setting
Modify predefined fixed ratios, and preset frequently used magnification
ratios.
Fixed/Six type
Preset Zoom/Three type
CS655 Pro
2
)/ Hole-Punch (Prohibition)/ Tab Paper (Prohibi-
Default
English
mm
Priority: (Tray 3/ Tray/1 Tray2)
off
Paper Type (Plain/High Quality Pa-
per/Color Specific) /Weigh (64-74,
2
75-80, 81-105g/m
)/ Hole-Punch
(Prohibition)/ Tab Paper (Prohibi-
tion)/ Color Paper (Prohibition)
Dryness preparation: On
Fan Heater Control(Tray4): Auto-
matic
Fan Heater Control (Tray5): Auto-
matic
60 seconds
Change user: Yes
ADF original direction: Not reset
Reset button function: Full auto
Mode memory auto call: Off
Finisher Mode by Full-auto: None
collate
Initial by Key Counter Insert: Off
Status Hold When Auto Reset: Not
keep
Next Job Staple Setting: Do Not
Release
Original Set/Bind Direction: Re-
lease
Machine
Fixed/Six type
Preset Zoom/Three type
4
4-9
Advertisement
Table of Contents
