Expert Adjustment \ 06 Process Adjustment \ 01 Front & Back Density - Oce CS655 Pro Administrator's Manual

Machine administrator setting
6.2.22 05 Expert Adjustment \ 06 Process Adjustment \ 01 Front & Back Density
Specify the front & back density setting for CMYK, front, back, and postcard.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [01 System Setting], [05 Expert Adjustment], [06 Process Adjustment], and then [01Front & Back
Density].
3
Touch the required item key.
4
Touch [+ <--> -] to specify the value to be positive or negative.
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -3 to +3
5
Touch [Return] to restore the Process Adjustment Menu Screen.
6
If further changes are required, touch the desired key.
CS655 Pro
6
6-33