Removing The Security Bezel; Replacing The Security Bezel - IBM System x3650 M5 Installation And Service Manual

Removing the security bezel

Use this information to remove the security bezel.
About this task
To remove the security bezel, complete the following steps.
Procedure
1. Read the safety information that begins on "Safety" on page vii and
"Installation guidelines" on page 283.
2. Unlock the security bezel, if needed.
3. ▌1▐Press the release latch and ▌2▐rotate the security bezel to disengage the
security bezel from the chassis.
Release latch
Security bezel
Figure 213. Security bezel removal
4. If you are instructed to return the security bezel, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.

Replacing the security bezel

Use this information to replace the security bezel.
About this task
To replace the security bezel, complete the following steps:
Procedure
1. Read the safety information that begins on "Safety" on page vii and
"Installation guidelines" on page 283.
2. ▌1▐Carefully insert the right end of the security bezel into the slots along the
right side of the chassis.
3. ▌2▐Rotate the security bezel until the other side clicks into place on the chassis.
Chapter 5. Removing and replacing components
257