Replacing The Lcd System Information Display Panel - IBM System x3650 M5 Installation And Service Manual

Replacing the LCD system information display panel

Use this information to replace the LCD system information display panel.
About this task
Removing the LCD panel assembly on a 3.5-inch model
To install the LCD panel assembly on a 3.5-inch model, complete the following
steps.
Figure 198. Retention bracket removal
Figure 199. LCD system information display panel installation
248
System x3650 M5 Type 5462: Installation and Service Guide
1. Read the safety information that begins on "Safety" on page vii and
"Installation guidelines" on page 283.
2. Turn off the server and peripheral devices and disconnect the power cords
and all external cables, if necessary.
3. Remove the top cover (see "Removing the top cover" on page 146).
4. Remove the fan cage assembly"Removing the fan cage assembly" on page
172).
5. ▌1▐Pull the tab on the LCD retention bracket to the left to disengage the
retention bracket. ▌2▐Rotate the retention bracket to remove it from the server.
Retention bracket
6. Carefully insert the LCD system information display panel into place.
LCD system information
display panel
7. Hinge the retention bracket into the slot on the LCD panel assembly and
rotate it until it clicks into place.