IBM System x3650 M5 Installation And Service Manual page 535

806f030d-041effff Hot Spare enabled for [ComputerSystemElementName]. (Drive 30)
Explanation: This message is for the use case when an implementation has detected a Hot Spare has been Enabled.
May also be shown as 806f030d041effff or 0x806f030d041effff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0170
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f030d-041fffff Hot Spare enabled for [ComputerSystemElementName]. (Drive 31)
Explanation: This message is for the use case when an implementation has detected a Hot Spare has been Enabled.
May also be shown as 806f030d041fffff or 0x806f030d041fffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0170
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0313-1701ffff A software NMI has occurred on system [ComputerSystemElementName]. (NMI State)
Explanation: This message is for the use case when an implementation has detected a Software NMI.
May also be shown as 806f03131701ffff or 0x806f03131701ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0228
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Check the device driver.
2. Reinstall the device driver.
3. Update all device drivers to the latest level.
4. Update the firmware (UEFI and IMM).
806f030d-041effff • 806f0313-1701ffff
Appendix A. Integrated management module II (IMM2) error messages
519