Replacing The Media Cage - IBM System x3650 M5 Installation And Service Manual

Replacing the media cage

Use this information to replace the media cage.
About this task
To install the media cage, complete the following steps:
Procedure
Figure 103. Media cage installation
Figure 104. Thumbscrew
178
System x3650 M5 Type 5462: Installation and Service Guide
1. Read the safety information that begins on "Safety" on page vii and
"Installation guidelines" on page 283.
2. Turn off the server and peripheral devices and disconnect all power cords.
3. Remove the top cover (see "Removing the top cover" on page 146).
4. Carefully slide the media cage into the server.
5. Tighten the thumbscrew to secure the media cage onto the server.
6. Reconnect the USB, CD/DVD and operator information/LCD panel cables to
the system board first; then, route the cables as the following illustration.
Remember to insert the cables into the cable clip for proper routing.
Media cage
Thumbscrew