Table of Contents
Advertisement
80070219-0701ffff • 8007021b-0301ffff
80070219-0701ffff
Sensor [SensorElementName] has transitioned to critical from a less severe state. (SysBrd
Fault)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
May also be shown as 800702190701ffff or 0x800702190701ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1.
Check for an error LED on the system board.
2.
Check the system-event log.
3.
Check for a server firmware update. Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.
4.
Replace any failing device.
5.
(Trained technician only) Replace the system board.
8007021b-0301ffff
Sensor [SensorElementName] has transitioned to critical from a less severe state. (CPU 1
QPILinkErr)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
May also be shown as 8007021b0301ffff or 0x8007021b0301ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1.
Check for a server firmware update.
2.
Make sure that the installed microprocessors are compatible.
3.
Make sure the microprocessor 2 expansion board is installed correctly (see Installing the microprocessor 2
expansion board).
4.
(Trained technician only) Replace microprocessor 2.
5.
(Trained technician only) Replace microprocessor 2 expansion board.
406
System x3650 M5 Type 5462: Installation and Service Guide
Advertisement
Chapters
Table of Contents
Troubleshooting
