Table of Contents
Advertisement
800b0509-1301ffff • 800b050a-1e81ffff
800b0509-1301ffff
Non-redundant:Insufficient Resources for [RedundancySetElementName] has asserted. (Power
Resource)
Explanation: This message is for the use case when a Redundancy Set has transitioned to Non-
redundant:Insufficient Resources.
May also be shown as 800b05091301ffff or 0x800b05091301ffff
Severity: Error
Alert Category: Critical - Redundant Power Supply
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0810
SNMP Trap ID: 9
Automatically notify Support: No
User response:
1.
Power load may be handled by remaining power supply. The system will attempt to throttle to avoid a power
supply over-current condition. But a system shutdown may happen anyway if the power load is too great.
2.
Reduce the total power consumption by removing newly added or unused options like drives or adaptors.
3.
Use the IBM Power Configurator utility to determine current system power consumption. For more information
and to download the utility, go to http://www-03.ibm.com/systems/bladecenter/resources/powerconfig.html.
4.
Replace the power supply with higher rated power if Oversubscription_Fault seen in power supply.
5.
Please reseat power cords and power supplies.
800b050a-1e81ffff
Non-redundant:Insufficient Resources for [RedundancySetElementName] has asserted. (Fan
Zone 1)
Explanation: This message is for the use case when a Redundancy Set has transitioned to Non-
redundant:Insufficient Resources.
May also be shown as 800b050a1e81ffff or 0x800b050a1e81ffff
Severity: Error
Alert Category: Critical - Fan Failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0810
SNMP Trap ID: 11
Automatically notify Support: No
User response:
1.
Make sure that the connectors on fan n are not damaged.
2.
Make sure that the fan n connectors on the system board are not damaged.
3.
Make sure that the fans are correctly installed.
4.
Reseat the fans.
5.
Replace the fans. (n = fan number)
416
System x3650 M5 Type 5462: Installation and Service Guide
Advertisement
Chapters
Table of Contents
Troubleshooting
