IBM System x3650 M5 Installation And Service Manual page 733

816f0308-0a01ffff [PowerSupplyElementName] has returned to a Normal Input State. (Power Supply 1)
Explanation: This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.
May also be shown as 816f03080a01ffff or 0x816f03080a01ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0099
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f0308-0a02ffff [PowerSupplyElementName] has returned to a Normal Input State. (Power Supply 2)
Explanation: This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.
May also be shown as 816f03080a02ffff or 0x816f03080a02ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0099
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f030c-2001ffff Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]has
recovered. (DIMM 1)
Explanation: This message is for the use case when an implementation has detected a Memory Scrub failure
recovery.
May also be shown as 816f030c2001ffff or 0x816f030c2001ffff
Severity: Info
Alert Category: Critical - Memory
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0137
SNMP Trap ID: 41
Automatically notify Support: No
User response: No action; information only.
816f0308-0a01ffff • 816f030c-2001ffff
Appendix A. Integrated management module II (IMM2) error messages
717